.png)
Product — Power frequency withstand voltage and partial discharge test system — Power frequency withstand voltage and partial discharge test system - gas transformer
Product name：Power frequency withstand voltage and partial discharge test system - gas transformer
Executive standard：GB/T 16927 High voltage test technology and relevant standards of various products
Other name：AC withstand voltage test device, power frequency test equipment, partial discharge test equipment, non partial discharge test transformer, inflatable test transformer and armored gas transformer
Component：Test transformer, voltage divider and coupling capacitor, protection resistance, control and measurement system (intelligent or electric), voltage regulator,
During partial discharge test：Add partial discharge instrument, power filter and shielding room; When triple frequency is selected, it can be used for induced voltage withstand test of voltage transformer;
| Purpose & brief description |
| ● It is mainly used to test the insulation level of various insulating materials, insulating structures, electricians, power products, etc. to withstand power frequency voltage and induced withstand voltage. It is also used as the power supply for power frequency test without partial discharge of various test objects; ● Application: power product manufacturing companies, power operation departments, scientific research institutions and colleges and universities; ● Application products: all kinds of insulating parts, medium voltage switchgear, GIS high-voltage switch, cable and cable accessories, transformer, power transformer, high-voltage circuit breaker, capacitor bushing, motor, lightning arrester, photovoltaic products and other high-voltage electrical components and insulating materials |
| Test purpose |
| ● It is used to test the insulation strength of various electrical products, electrical components and insulating materials under the specified voltage, assess the insulation level of the products, find the insulation defects of the tested products and measure the overvoltage capacity; ● The purpose of partial discharge test is to find defects in equipment structure and manufacturing process; For example, the local electric field intensity inside the insulation is too high; Metal parts have sharp corners; The insulation is mixed with impurities or partially defective, and the electrical connection between metal grounding parts and conductors in the product is poor, so as to eliminate these defects and prevent partial discharge from damaging the insulation; |
| Technical parameter |
| ● Working power supply: 220V / 380V, 50 / 60Hz ● Test voltage: 1-1000kv ● Test capacity: 1 -- 1000KVA ● Test voltage waveform: the distortion rate of sine wave waveform is less than or equal to 3% ● Accuracy of test voltage: Level 1 ● The system has overvoltage protection, overcurrent protection, discharge protection and breakdown trip protection; ● Transformer type: Armored SF6 gas test transformer (mainly used for GIS and basin insulator products) |
| Technical features |
| ● The product has small partial discharge and low temperature rise, which is superior to the provisions of the national standard; ● Low impedance voltage and low no-load loss, which is superior to the national standard; ● Adopt automatic control technology and computer (photoelectric) measurement and control, with high degree of automation and strong anti-interference ability; ● Adopt fast power protection device with high reliability; ● The test transformer adopts high-quality imported silicon steel sheet, new insulation materials, the latest design theory and special production process. They are small and light, but have high voltage level and large output capacity; ● Small volume and light weight; Compared with the traditional oil immersed light test transformer of the same capacity grade, its weight is reduced by 20% - 60%, which is easy to move. It is very suitable for enterprises and institutions with frequent change of test site; ● The insulating medium is gas, and the test can be carried out without static waiting after moving, which saves a lot of working time; ● Clean and free from oil pollution; ● The insulation strength is significantly higher than that of oil immersed type, and the local quantity is very small; ● Since it is not interfered by the electromagnetic field of the surrounding environment, there is no need to build a shielding test hall, and the partial discharge level of the whole test system can be controlled below 1pc; ● It is especially suitable for GIS and basin insulator products. With the corresponding test tooling, it can automatically change the phase without manual wiring and improve the work efficiency; |
Feidian electric energy provides more professional testing equipment and technical services for power transformer, transformer, switch, high-voltage cable, power capacitor, bushing, insulator, lightning arrester, motor and other manufacturers
MORE QR code
Focus on us
Contact
Shanghai Feidian Electric Co.,Ltd
Address：Lingang section of Shanghai Pilot Free Trade Zone
Tel：13761804576
Email：zhangzaihui@126.com
Web site：www.feidian.net.cn
COPYRIGHT © 2021 Shanghai Feidian Electric Co.,Ltd ALL RIGHTS RESERVED
.png)
PREV 
